h3c查看路由表命令

h3c查看路由表命令
display ip routing-table
display ip routing-table protocol static
display ip routing-table statistics
display ip routing-table verbose 查看路由表的全部詳細信息
interface vlan-interface vlan-id 進入valn
management-vlan vlan-id 定義管理vlan號
reset ip routing-table statistics protocol all 清除所有路由協議的路由信息.
display garp statistics interface GigabitEthernet 1/0/1 顯示以太網端口上的garp統計信息
display voice vlan status 查看語音vlan狀態
[h3c-GigabitEthernet1/0/1] broadcast-suppression 20 允許接受的最大廣播流量為該端口傳輸能力的20%.超出部分丟棄.
[h3c-GigabitEthernet1/0/1] broadcast-suppression pps 1000 每秒允許接受的最大廣播數據包為1000傳輸能力的20%.超出部分丟棄.
display interface GigabitEthernet1/0/1 查看端口信息
display brief interface GigabitEthernet1/0/1 查看端口簡要配置信息
display loopback-detection 用來測試環路測試是否開啟
display transceiver-information interface GigabitEthernet1/0/50 顯示光口相關信息
duplex auto/full/half
[h3c]interface GigabitEthernet1/0/1
[h3c-GigabitEthernet1/0/1]duplux auto 設置端口雙工屬性為自協商
port link-type access/hybrid/trunk 默認為access
port trunk permit vlan all 將trunk扣加入所有vlan中
reset counters interface GigabitEthernet1/0/1 清楚端口的統計信息
speed auto 10/100/1000